In this study, the effects of using fine milled cassava stems as an additive in biofuel pellet production was compared to the effects of refined starch addition. The bulk biomass fuel raw material, to which the additive was added, was a blend of spruce and pine sawdust. An experimental design in the factors cassava/starch content, moisture content and material temperature was used. Measured responses were pellet bulk density, pellet durability, amount of fines, pelletizer motor current, pellet temperature, die temperature and CV for pelletizer motor current (a measure of process stability). Each response was modeled by multiple linear regression (MLR).

An impulse or unplanned purchase is a decision taken on the spot without further consideration or reflection. It is the spur of the moment that influences the purchase rather than a deliberated decision. Being loyal to a particular brand means a mutual relationship between customer and company created over time which may result in the customer experiencing a higher value and thus prefer a particular brand before another.Bulk confectionary can be characterized as an impulse product because it is purchased at times without any time of consideration or planning. The question that arises is whether all bulk confectionary purchases are unplanned? Through this study it shall be examined whether any brand loyalty actually exists regarding bulk confectionary; does the customer plan its confectionary purchases in beforehand or do most of them occur through impulses? Furthermore, the study will highlight who the customer is of bulk confectionary in Sweden.The survey was conducted through a combination of a quantitative and qualitative method.

AbstractCorporate cultures have since the 80's, when the phenomenon was associated with a company's economic success, been a frequent research object. Corporate culture is then often described as something that can create efficiency, success and loyal employees. Often discussed about strong corporate cultures are that members in the organization have accepted the same norms, values and goals. Research also mention unique corporate cultures, where no organization is alike, depending their different stories, leaders, backgrounds or geographical locations.?? This study aims, through observations and interviews on an ethnographic basis, to describe the corporate culture in Stena Bulk.

Mastitis, an inflammation of the udder mainly caused by a bacterial infection, induces an increase in the somatic cell count (SCC) in milk and is consequently one of several factors affecting SCC in milk. In this literature review it is investigated whether SCC; on udder quarter, cow composite or bulk tank milk level, can be used as a quality marker with focus on milk composition in terms of the content of fat, lactose, total protein, casein and whey protein. According to this literature review the relation between SCC and milk composition is not reliable either on udder quarter, cow composite or bulk tank milk level. SCC was related to lactose, casein and whey protein on udder quarter level; lactose and whey protein on cow composite level and lactose on bulk tank milk level.

Protein is an important component in various milk products and has a crucial role in the final quality. Excluding non-protein nitrogen, bovine milk contains about 3.3% protein whereas about 80% of this fraction consists of casein. There are four major members in the casein family: ?s1-casein, ?s2- casein, ?-casein and ?-casein. Proteolytic enzymes are the cause of degradation of the economically important milk proteins.

At the Skoghall pappermill, sulphatepaper pulp is produced in a continuous digester originally from 1969. To be able to maintain a high level of production there is a need for a process with few disturbances. Variations in how well the wooden chips are packed in the digester is one form of disturbance. Today there are no available measurements on how well the chips are packed. Instead this is regarded as being constant.

Purpose: The study aims to increase knowledge of dealers' purchasing behavior of impulse goods in wholesale trade.Methodology: An exploratory survey method has been selected in order to investigate the relatively unexplored topic; buyer behavior of impulse goods in the wholesale. Data has been collected through interview of 27 dealers that conduct business with bulk confectionery sales across Sweden. A semi-structured interview technique has been selected, with a predetermined interview schedule but with space for follow-up questions and discussion.Conclusion: The background to this work argued that there is not much research on how retailers reasons when buying convenience products, or also called as impulse items. It is usually the sale of goods such as several of the informants believe is critical to their business existence. Impulse goods which do not require any effort, has little search time and usually are cheap and suits many customers pockets.

With this essay, I want to examine the image of Russians in the Swedish rural press during the second half of the 19th century, how rusophobia appeared in Swedish rural press and how the image of Russians changed during this time. To find this out, I set these questions:  ? How was Russians and Russia portrayed in the Swedish rural press? ? Did the view of Russians change during this time?The essay is written so that I have interpreted my empirical material to do a discourse analysis in which I analyse different articles that have been written about Russia and Russians in a stereotypical way. The source material used in the thesis comes from 41 news articles; the bulk of the source material comes from newspapers that were published during the late 19th century.Rural press reporting on Russia and Russians were in the second half of the 19th century mostly negative. Of the 41 articles that were examined it was found that about half were negative, less than one-sixth were positive, while about a third were neutral.The reason that many of the articles were negative has to do with Sweden's shared history with Russia, with many wars and territorial losses.

The global wood pellet market has seen a rapid growth after the adoption of the Kyoto protocol and the renewable energy incentives created within the European Union. The global consumption of wood pellets reached 13,5 million tonnes in 2010 and several experts estimate the consumption to be between 35-50 million tonnes by 2020. These forescasts raise the questions which regions that can supply this vast amount of wood pellets and what the conditions are for producing it. This study evaluates the conditions for wood pellet production and export from British Columbia, on Canada?s west coast, focusing on existing industry structure, raw material supply and the distribution chain.

The rainforests of the world are important not only to the countries in which they grow but to the world as a whole. They influence oxygen and water circulation as well as carbon sequestration which in turn affect global radiation and global warming. The forest also have great value and in Malaysia as in many other tropical countries large volumes are harvested which leaves great areas of degraded forest with little growth and biological diversity. Due to their low financial value these forests are often transformed and used for other purposes than forestry such as oil palm plantations. The trees are often transported out of the forest using large bulldozers. They are heavy which causes compaction of the forest floor and during transport the top soil layers are moved to improve mobility.

Det är allt vanligare inom tredjepartslogistik att kunder hyr en yta för lagring. För den uthyrande parten, i detta fall Delta Terminal, är arean den begränsande faktorn för hur stor yta som kan hyras ut. Idag använ-der sig Delta Terminal av beslutsunderlag i form av lokalernas area och erfarenhet vart gods ska placeras och har inget hjälpmedel för att beräkna vart och hur mycket gods som kan allokeras för att använda så liten yta som möjligt. Studiens syfte har därför varit att ta fram ett faktabaserat hjälpmedel som kan användas som beslutsunderlag. För att uppnå syftet har en matematisk modell utvecklats för att optimera hur gods kan placeras till olika lokaler för att använda så liten area som möjligt och även kunna simulera förändringar.

Swedish agriculture has gone through big changes in the latest 60 years. The farm sizes have increased, which has led to raised tractor and machinery sizes and therefore increasing problems with soil compaction. A method to reduce these problems is to implement controlled traffic farming, CTF. All field operations are then concentrated to specific tracks by using GPS guidance. The aim of this work was to study how the tillage regime, with or without CTF, affects the soil, with the main focus on macroporosity. In Säby close to Uppsala, and Alnarp close to Malmö, randomized block trials has been carried out, and the data has mainly been taken from these trials.

This master thesis was done for a company called BRUKS which is active in woodprocessing,bio-energy and Bulk material handling industry. The idea for the master thesis wasto develop a new reclaiming method for silos where wood chips are being stored. A mediumsegment of between 1000 ? 5000 m3was defined as the segment with the most sales potential.Two different concepts were produced, one for new constructions and one for rebuildingalready existing silos.In the beginning of the master thesis a lot of time was spent on visiting different BRUKSoffices and customers to get an overview of the industry and the product. This informationwas the basis when the idea generating phase began.

The use of renewable resources is rapidly increasing in Sweden, especially the use of fuel pellets. Through pelletizing the energy content per volume unit is greatly increased and the pellets are more homogeneous with regard to moisture content, particle size and density compared to unrefined fuels like forest residues and chips. For further development of the Swedish pellet industry, the use of different assortments from lodgepole pine (Pinus contorta Dougl. var. latifolia) is of particular interest, mainly because of its high volume production.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.